A dead pixel test for a PC uses eight solid sRGB color fields to reveal stationary points that do not match the surrounding display.
Use the Dead Pixel Test as a visual inspection aid for a desktop monitor or laptop screen, not as a hardware diagnosis or repair service. It fills one large browser panel, requests fullscreen only when you start it, and does not upload screenshots, observations, display identifiers, color profiles, or navigation history.

What the PC test actually displays
A PC display can look normal on one background and expose a small problem on another. The test presents the same large panel in a fixed sequence: black, white, red, full-channel green, blue, cyan, magenta, and yellow. Because each color fills the panel instead of appearing as a small swatch, you can compare the center, edges, and corners.
The palette uses exact CSS values rather than approximate theme colors. The W3C CSS Color 4 named-color specification defines the color values, while the MDN named-color reference documents the named-color notation. These references define the requested browser colors; they do not certify the physical output of a particular monitor.
| Pattern | Exact CSS sRGB value | What to look for |
|---|---|---|
| Black | #000000 | Bright or colored points that remain visible against the dark field, plus reflections that can imitate defects. |
| White | #ffffff | Dark or off-color points that stand out against the bright field. |
| Red | #ff0000 | A single-channel red field for comparing points that show an unexpected or unequal color. |
| Green | #00ff00 | The full green channel, named lime in CSS, rather than the darker CSS color green. |
| Blue | #0000ff | A single-channel blue field that provides another direct color comparison. |
| Cyan | #00ffff | A green-and-blue field that can make some combined-color differences easier to notice. |
| Magenta | #ff00ff | A red-and-blue field for checking whether a fixed point changes with the displayed combination. |
| Yellow | #ffff00 | A red-and-green field that completes the eight-color sequence. |
Use every field as a different viewing condition, not as a pass-or-fail rule. A point that remains dark on white or a primary field may not emit as expected, while a bright point or one showing an unexpected component can stand out on black or another combination. A genuine-looking mark should stay in the same physical location as you move through the colors.
Run the dead pixel check on your PC
- Clean the outer display surface. Follow the display manufacturer's safe cleaning method and clean only the outside surface. This helps rule out obvious dust before you interpret a stationary mark as panel damage.
- Open the tool and select Start fullscreen test. The browser may approve or deny the fullscreen request. If permissions, embedding, policy, platform limits, or user settings prevent it, the page reports the failure and the in-page panel remains usable.
- Begin with the black field. Scan the entire visible panel rather than concentrating on the center. Look for points that remain brighter, colored, or otherwise different from the surrounding field.
- Advance through the sequence. Click the panel, press Space, or use the arrow keys to move forward or backward. The progress line always identifies the current pattern, its position in the sequence, and its exact hexadecimal sRGB value.
- Inspect all eight colors in several areas. Include the center, edges, and corners, and note any mismatch that stays fixed in the same place across several fields. Different solid colors can make different visual defects easier to notice.
- Exit fullscreen normally and check the result. Use the browser's normal exit control or Escape behavior. Follow the manufacturer's own diagnostics before making a repair or replacement decision.
Keep a simple record of which colors reveal the mark, approximately where it appears, and whether it remains stationary. This is observation for your own troubleshooting or support request; the tool does not create or upload a diagnostic report.
Read the results without overdiagnosing
People often use “dead pixel” as a general term for a spot that stays dark, but a visible mismatch does not automatically identify a failed pixel. The symptom can originate outside the panel or come from display processing, so the color test is only one part of a careful investigation.
- Dust, reflections, fingerprints, and screen protectors can create fixed-looking spots or marks.
- Pressure marks and image retention can resemble a panel defect even though the pixels may still respond normally.
- Browser zoom, scaling, rendering behavior, and graphics-output problems can produce artifacts that do not belong to the physical panel.
- Cable faults or remote-display compression can create symptoms that are difficult to distinguish from a monitor problem.
- Stuck subpixels, panel processing, or other hardware faults may produce a persistent dark, bright, or unexpected-color point.
A screenshot can help only when interpreted carefully. A physical defect generally will not become part of a screenshot, while a rendering defect might. That makes a missing mark in an image useful context, but it is not conclusive proof that the panel is healthy.
Fullscreen, colors, and browser limits
Fullscreen is only a browser request made from the Start button. It is not a separate diagnostic mode, and it does not change how the browser or operating system manages the display.
- The tool does not force kiosk mode or hide operating-system controls.
- It does not disable sleep or change brightness, scaling, HDR, or display settings.
- The browser retains its normal Escape behavior for leaving fullscreen.
- If fullscreen is rejected, the page reports that result and the large in-page panel continues to cycle through every color.
- The current pattern index exists only in the active tab and resets when the page reloads.
The exact CSS request does not guarantee that the physical light emitted by your monitor will look identical. Browser color management, operating-system profiles, HDR modes, panel gamut, scaling, subpixel layout, viewing angle, local dimming, image enhancement, burn-in protection, and hardware calibration can all affect the result. The test identifies the requested stimulus, not a measured color from your panel.
Compare a symptom before choosing a next step
Use the pattern of the symptom to narrow the next action without assuming that every mismatch is a dead pixel.
| Observation | Possible explanations | Sensible next step |
|---|---|---|
| One fixed dark-looking point appears across several fields. | Dust, reflection, a protector, a pressure mark, a stuck subpixel, or another panel fault. | Clean the outer surface, repeat the inspection, and use manufacturer diagnostics if it remains. |
| A fixed point stays bright or shows an unexpected color. | A stuck subpixel, panel processing, reflection, or image enhancement may be responsible. | Compare it on black and the primary fields, then follow the manufacturer's diagnostic process. |
| The mark appears in a screenshot or changes with browser zoom or window size. | Content-generation or rendering behavior may be involved, although this alone does not clear the physical panel. | Compare the screen and image carefully, and do not base a warranty claim on the screenshot alone. |
| Damage spreads, or the PC shows electrical symptoms or impact damage. | The situation extends beyond an ordinary fixed-pixel mismatch. | Stop using the display and follow qualified manufacturer guidance. |
Confirm a suspected fault before repair
After completing the color inspection, use the PC or display manufacturer's own diagnostics and warranty guidance. They remain the appropriate authority for determining whether a fault is covered and whether the display should be repaired or replaced.
- Do not press, tap, or apply pressure to a suspected pixel or panel area.
- Do not use heat or attempt to loosen or replace internal display components.
- Do not rapidly flash the panel; this tool deliberately uses static fields with no rapid strobe.
- Do not install untrusted repair software or follow a destructive pixel-fixing claim based only on this visual check.
If the display shows spreading damage, electrical symptoms, impact damage, or any safety concern, stop the test and seek qualified manufacturer guidance. Otherwise, document the stationary location and the fields in which it appears, then let the manufacturer's diagnostic result guide the next decision.
For a deeper look, see Dead Pixel Test for TV: A Practical Screen Check.
For a deeper look, see Free Dead Pixel Test With No Sign-Up: Check a Display.