A dead pixel test for a TV uses eight solid sRGB colors to reveal pixel-like mismatches, but one visible mark does not prove that a pixel is dead.
The browser-based Dead Pixel Test fills one large panel with those solid fields and requires no uploads. It is a visual aid for deciding whether a persistent mark warrants manufacturer diagnostics, not a hardware diagnosis or repair service.

What the eight TV color fields can reveal
The test sequence is black, white, red, full-channel green, blue, cyan, magenta, and yellow. Different fields make different faults easier to notice. A point that remains dark on white or a primary color may not be emitting as expected, while a bright point or an unexpected color component can stand out against black or another combination.
| Pattern | Exact requested CSS sRGB value | Visual emphasis |
|---|---|---|
| Black | #000000 | Unexpected bright or colored points |
| White | #ffffff | Points that remain dark |
| Red | #ff0000 | Points that differ from the surrounding red field |
| Green, using CSS lime | #00ff00 | Mismatches against the maximum green channel |
| Blue | #0000ff | Points that differ from the surrounding blue field |
| Cyan | #00ffff | Combined green-and-blue behavior |
| Magenta | #ff00ff | Combined red-and-blue behavior |
| Yellow | #ffff00 | Combined red-and-green behavior |
These are explicit requested CSS color values, not approximate theme swatches or measurements taken from the panel. The W3C CSS Color Level 4 named-color list and MDN's named-color reference identify #00ff00 as lime. CSS green is the darker #008000 and is not the single-channel maximum used here.
Run the dead pixel test on your TV
- Clean the outer surface first. Use the TV manufacturer's safe cleaning method and clean only the outside display surface. This helps distinguish an obvious dust mark from a point that appears to remain inside the panel.
- Open the test and start fullscreen. Load the Dead Pixel Test in the TV's web browser and select Start fullscreen test. This direct action asks the browser for a larger presentation of the color panel.
- Continue if fullscreen is denied. Browser permissions, embedding, organizational policy, platform limitations, or user settings can cause a fullscreen request to fail. The page reports that failure, and its in-page panel still cycles through all eight patterns. The test does not force kiosk mode, hide operating-system controls, disable sleep, change brightness, or alter display settings.
- Inspect every field. Check black, white, red, green, blue, cyan, magenta, and yellow in order. Click the panel, press Space, or use the arrow keys to move through the sequence. Arrow navigation supports forward and backward movement with wraparound. The progress line identifies the current pattern, its position, and its exact hexadecimal value.
- Look across several regions. Examine the center, edges, and corners rather than concentrating on one small area. Note a mismatch only when it remains stationary across several fields. Moving marks, overlays, or changing browser artifacts should not be recorded as fixed panel marks.
- Record useful details. Note the mark's approximate location, whether it stays dark or shows an unexpected color, and which fields make it visible. This gives the manufacturer more useful information than simply reporting that the TV has a “bad pixel.”
- Exit normally and use manufacturer diagnostics. Leave fullscreen through the browser's normal controls or Escape behavior. Before requesting repair or replacement, run the diagnostics prescribed by the TV manufacturer. The browser test is a visual aid, while the manufacturer's process remains the authority for identifying a hardware fault.
Read the eight patterns correctly
No single color establishes whether a point is defective. Use the combination of fields to understand the symptom, then avoid assigning a hardware diagnosis without further checks.
| Observation across fields | Possible explanation | Next step |
|---|---|---|
| A dark point stays in place on white and primary colors | A non-emitting subpixel or a rendering or panel-processing issue is possible | Repeat the test, confirm that the mark is stationary, and consult manufacturer diagnostics |
| A bright or colored point stands out on black | A stuck subpixel, panel processing, reflection, or dust is possible | Clean the outer surface and repeat the check under consistent viewing conditions |
| An unexpected color component appears in a primary or combined color | Channel behavior, processing, or a rendering difference is possible | Compare the same physical location across several fields |
| The mark shifts, changes size, or appears only from one position | An overlay, scaling issue, browser zoom effect, viewing-angle effect, or image processing may be responsible | Remove overlays and repeat from a consistent position and angle |
| The mark looks like dirt and changes after cleaning | Surface contamination is possible | Inspect the clean screen again before recording a panel symptom |
The browser's requested color and the light physically emitted by a TV are not guaranteed to be identical. The CSS specification defines the requested digital color values, but it does not certify the output of a particular television panel.
Separate surface and screen-chain effects
A suspicious point can have several causes. Before treating it as a dead or stuck pixel, consider the following:
- Dust, reflections, protectors, and pressure marks: These affect the visible surface or reflection rather than necessarily indicating a failed subpixel.
- Browser and display scaling: Zoom artifacts, scaled interfaces, GPU output, cable faults, and remote-display compression can create or change visible marks.
- Image retention and panel processing: Local dimming, image enhancement, burn-in protection, and other processing can alter how a field looks.
- Rendering differences: A screenshot can sometimes help separate content-generation problems from physical panel issues, but it must be interpreted carefully. A physical defect generally does not become part of a screenshot, while a rendering defect might.
The test does not upload screenshots, display identifiers, color profiles, observations, or navigation history. Its current pattern index stays in the tab and resets when the page reloads.
Prepare the TV for a repeatable visual check
For the clearest comparison, view the screen directly in consistent lighting and minimize reflections. Keep the same input, picture mode, and brightness settings during the full sequence. Inspect the corners and edges as well as the center, because a single small point can be missed when the viewer concentrates only on the middle of a large television.
Even with these precautions, appearance can be affected by browser color management, operating-system profiles, HDR modes, panel gamut, scaling, subpixel layout, viewing angle, local dimming, image enhancement, burn-in protection, and hardware calibration. The test identifies the requested stimulus on the screen; it does not provide a calibrated measurement of the TV's physical color output.
For a second pass, try the in-page panel if fullscreen was rejected. Compare the same locations without changing TV settings. If the mark appears only from a particular angle or under a particular reflection, treat that observation as an environmental factor rather than proof of a failed pixel.
Decide whether repair is needed
After the visual check, document the location and behavior of every persistent mark and provide that information to the TV manufacturer. A visible mismatch alone is not enough to establish a warranty claim because the mark may reflect dust, reflections, scaling, rendering, image retention, stuck subpixels, panel processing, or another hardware fault.
Do not apply pressure, tap the panel, heat it, rapidly flash the screen, install untrusted repair software, or try a destructive pixel-fixing claim based on this check. The test uses static fields and provides no rapid strobe or repair action. If the display shows spreading damage, electrical symptoms, impact damage, or any safety concern, stop using it and follow qualified manufacturer guidance.
Manufacturer diagnostics and warranty policies should determine whether the TV requires repair or replacement. The benefit of the browser test is that it provides a controlled eight-color visual comparison without uploading content or altering the television's settings; it is not a substitute for those procedures.
If you're weighing options, Keyboard Tester on Laptop: Dead, Sticky, Ghosting Keys covers this in detail.
If you're weighing options, Free Dead Pixel Test With No Sign-Up: Check a Display covers this in detail.