The free Dead Pixel Test requires no sign-up and displays eight solid sRGB CSS color fields in your browser for visual display inspection, without uploads.
Open the Dead Pixel Test to begin a browser-based screen check without creating an account. It is a visual aid rather than a hardware diagnostic: the page identifies the exact CSS color requested by the browser, but the light physically emitted by your display can still vary.

What this no-sign-up test checks
The tool fills one large, focusable panel with one solid color at a time. Its sequence is black, white, red, full-channel green, blue, cyan, magenta, and yellow. The check is intended for visual inspection, not for producing an automatic pass-or-fail result, measuring the panel's actual output, or repairing a defect.
Different solid fields can expose different visual mismatches. A point that stays dark on white or a primary color may not be emitting as expected. A point that remains bright or shows an unexpected color component may stand out against black or another combination. Inspecting every field is therefore more useful than judging the screen from one color alone.
A progress line identifies the active pattern, its position, and its exact hexadecimal CSS value. That information describes the requested stimulus, not a color measured from the display. This distinction matters because a browser request and the panel's physical output are not guaranteed to look identical.
Run the eight-color screen check
- Open the Dead Pixel Test, then clean only the outer display surface using the display manufacturer's safe cleaning method. Do not attempt to clean inside the panel.
- Select Start fullscreen test. The browser will request a larger presentation for the solid-color panel. If the request is accepted, continue the inspection in fullscreen.
- Inspect black, white, red, lime, blue, cyan, magenta, and yellow in order. Use the progress line to confirm which pattern is active and which exact CSS value it requests.
- Move through the sequence by clicking the panel, pressing Space, or using the arrow keys. Navigation supports forward and backward movement with wraparound at either end.
- For each color, scan several areas of the panel, including the edges and corners. Look for points, lines, or patches that remain in the same location across multiple fields.
- Exit fullscreen normally when the inspection is complete. For a persistent mismatch, clean the outer surface again using the safe procedure and use the manufacturer's diagnostics before making a repair or replacement decision.
Exact color fields used by the browser
The test uses an explicit fixture rather than approximate theme colors:
| Color field | CSS name | Exact sRGB value |
|---|---|---|
| Black | black | #000000 |
| White | white | #ffffff |
| Red | red | #ff0000 |
| Full-channel green | lime | #00ff00 |
| Blue | blue | #0000ff |
| Cyan | cyan | #00ffff |
| Magenta | magenta | #ff00ff |
| Yellow | yellow | #ffff00 |
The green field is labeled lime because it uses the full green sRGB channel. CSS also defines a darker named color, green, as #008000, but that value is not the single-channel maximum used by this test. The documented values can be checked against the W3C CSS Color 4 named-colors reference and MDN's named-color reference.
Those references define the web color values; they do not certify the physical output of a particular monitor. A display may still look different because of its own gamut, calibration, processing, or viewing conditions.
Fullscreen denial and private browser operation
Fullscreen is only a browser request made by the Start button. A browser can deny it because of permissions, embedding, organizational policy, platform limitations, or user settings. When that happens, the page reports the failure and the in-page panel continues cycling through all eight patterns. Clicking the panel, pressing Space, or using the arrow keys still provides navigation.
Entering fullscreen does not turn the page into kiosk mode. The tool cannot hide operating-system controls, disable sleep, change brightness or display settings, or prevent the browser's normal Escape behavior. Those controls remain available, so you can leave the test normally when you finish.
No screenshot, display identifier, color profile, observation, or navigation history is uploaded. The current pattern index exists only in the tab and resets when the page reloads. This supports a free, no-sign-up workflow without sending a captured screen or diagnostic record to the tool.
Interpret a visible mismatch cautiously
A visible mismatch is not automatically a dead pixel. Dust, reflections, screen protectors, pressure marks, image retention, stuck subpixels, browser zoom artifacts, GPU output, cable faults, and remote-display compression can produce different or similar-looking symptoms. Cleaning the outer surface helps separate obvious dust from a persistent mark, but it cannot rule out every hardware or software cause.
Appearance can also be changed by browser color management, operating-system profiles, HDR modes, panel gamut, scaling, subpixel layout, viewing angle, local dimming, image enhancement, burn-in protection, and hardware calibration. The hexadecimal value shown by the tool tells you what CSS color it requested. It does not tell you the exact physical red, green, and blue values leaving the screen.
The test deliberately uses static fields. It does not rapidly flash the panel, create a seizure-risk animation, force an instruction to remain on screen, or promise a repair. This makes it a focused visual check rather than a stress test or a hardware-recovery procedure.
Confirm a suspected defect before seeking help
A stationary point that remains visible across several color fields deserves further investigation. Before concluding that it is inside the panel, clean only the outer surface by the manufacturer's safe method and compare the location again. Record what you observe so you can describe the affected area accurately when contacting the manufacturer, but do not treat the browser page as a formal diagnostic report.
A screenshot can sometimes help separate content-generation problems from physical panel issues, but it must be interpreted carefully. A physical defect generally does not become part of a screenshot, while a rendering defect might. That distinction is useful evidence but is not conclusive on its own.
Manufacturer diagnostics and warranty policies remain the appropriate authority for repair or replacement. Do not apply pressure, tap the panel, heat it, rapidly flash it, install untrusted repair software, or follow a destructive pixel-fixing claim because of this visual check. If the display shows spreading damage, electrical symptoms, impact damage, or any safety concern, stop using it and follow qualified manufacturer guidance.