A gear rotation puzzle for beginners is a placement game: fill every socket, connect the clockwise driver to the target, earn 200 points per gearbox, and finish all five levels for exactly 1,000 points (5 × 200 = 1,000). In Gear Rotation Puzzle, each level is a complete placement problem rather than a single “which gear turns this way?” question. You assign three or four distinct candidates to fixed sockets, then test whether the entire arrangement forms one physically consistent train.
The visible gear sizes matter because each candidate’s size matches its tooth count, but size alone does not create a connection. The game uses ideal same-module external spur-gear geometry, so two placed gears become neighbors only when their centers and pitch circles meet under the stated tolerance. This makes it a small construction puzzle, not a tool for sizing a real transmission.

What the beginner board is showing
Before moving a gear, separate the fixed parts of the board from the movable candidates. The driver and target define the two ends of the train, while the sockets determine where the remaining gears can go. A complete solution must satisfy both the physical layout and the resulting rotation rules.
| Board element | What it means for a beginner |
|---|---|
| Clockwise driver | The fixed gear on the left that starts the powered component. |
| Target gear | The fixed gear on the right; it turns only when the complete placed graph is connected and conflict-free. |
| Fixed sockets | The legal locations for candidate gears, with one distinct gear assigned to each socket. |
| Candidate rack | Three or four available gears whose visual sizes match their tooth counts. |
| Contact gap | A link exists only when pitch-circle geometry meets the game’s 0.75-unit tolerance. |
| Direction label | Reports whether the target turns clockwise or counterclockwise. |
| Speed ledger | Reports the ideal target-to-driver speed magnitude, not real torque or power. |
These elements also explain why every candidate must be used. The game is not asking you to build the shortest visible chain or place only the gears needed to touch the target. It requires a complete assignment, and every placed gear must belong to the same powered component.
Build and test your first gear train
- Open the first fixed gearbox and identify its ends. Locate the clockwise driver on the left, the target on the right, the empty sockets between them, and the candidate rack. Note the visible size of every candidate before placing any of them.
- Select one candidate gear. Click or tap a rack control, or hold a candidate with number keys 1 through 4. A visible held state shows which gear you are carrying. Once that gear reaches the board, its rack control is disabled so the same candidate cannot be placed twice.
- Place the held gear into a fixed socket. Select the socket directly, or use Q, W, E, and T for sockets from left to right. If you need to move a gear already on the board, clear it first: tap its occupied socket, or press its socket key while no candidate is held.
- Fill every socket with a different candidate. Do not leave a socket empty and do not reuse a rack gear. A partially filled board cannot be submitted, so construction must be complete before testing begins.
- Inspect each apparent contact. Two ideal pitch circles create a contact only when the distance between their centers matches the sum of their radii within 0.75 game units. A pair that merely looks close may remain disconnected, so use the visible gap rather than assuming nearby gears are connected.
- Trace one continuous path from driver to target. Follow actual contacts through the placed gears. Every placed gear must have a route back to the driver, and the target must be reachable from that same component. Filling all sockets is necessary, but a missing contact or isolated gear still makes the layout invalid.
- Test the completed train. Press Enter or use the test control. The solver starts the driver at signed speed +1 and propagates through every geometric neighbor. For touching gears, it uses ω_next = −ω_current × T_current / T_next, where each tooth count belongs to the corresponding gear. The minus sign represents the reversal caused by an external mesh. If propagation reaches an already assigned gear with a contradictory direction or speed, the layout contains a conflict.
- Read the result and continue. After a successful test, the target label gives its direction and the side ledger gives the ideal speed magnitude. Each correct train awards 200 points and opens the next fixed gearbox. After the fifth success, the completed level remains visible and rotating while interactions are frozen, preserving the 1,000-point result on the board.
Check the chain before checking direction
The fastest way to avoid a direction mistake is to check the physical graph first. Look for a continuous route of touching gears from the left-hand driver to the right-hand target. Do not count a visually straight line as a connection: every link in that route must meet the geometric contact rule.
- Confirm that every socket contains a gear and that no candidate appears twice.
- Trace from the driver through actual contacts and make sure no placed gear is stranded.
- Confirm that the same connected component reaches the target.
This separates two different requirements. Connectivity asks whether the gears form a usable path; direction and ratio checks ask whether that path can rotate consistently. The board calculates contacts from geometry rather than comparing your arrangement with a hidden answer, so the visual gaps and tooth-count relationships provide the relevant clues.
Read reversal and speed without guessing
Every external mesh reverses rotation. In a valid simple train, count the external contacts rather than the total number of visible gears: an odd number of contacts makes the target turn opposite the driver, while an even number makes it turn in the same direction. One contact puts the target counterclockwise; two contacts bring the direction back to clockwise.
An idler gear can bridge a physical gap and adds another reversal along the train. In this ideal model, however, its own tooth count appears once in a numerator and once in a denominator, so it cancels from the end-to-end speed magnitude of a simple train. The final ideal magnitude therefore depends on the driver and target tooth counts. See how an idler gear affects the end-to-end ratio in Gear Rotation Puzzle for a focused explanation of that relationship.
Closed contact loops require additional care. An odd loop of external gears creates a contradiction because the same gear would have to rotate both ways; an even loop can remain direction- and ratio-consistent. The target turns only when the full placed graph is connected and free of these conflicts. Reduced-motion users receive the same direction and ratio state without needing the animation.
Recover from a failed layout safely
Only a completely filled train can be tested, and exploring placements does not itself count as an error. Selecting, removing, or replacing a candidate incurs no score penalty. One distinct failed full layout remains recoverable, with feedback identifying whether the target is disconnected, a gear is isolated, or a direction conflict exists.
| Action or state | Game result |
|---|---|
| Correct complete train | Awards 200 points and opens the next fixed gearbox. |
| Five correct layouts | Completes the fixed route for exactly 1,000 points and freezes the final board. |
| One distinct failed full layout | Can be revised using the disconnection, isolation, or conflict feedback. |
| Identical failed assignment submitted again | Is deduplicated and does not consume the remaining chance. |
| Second different failed assignment | Closes the run. |
| Partially filled board | Cannot be submitted. |
| Selection, removal, or replacement | Does not count as an error or reduce the score. |
Restarting returns the game to level one with an empty board, zero score, no failed-layout signatures, and no held candidate. There is no time bonus, random level, adaptive difficulty, hidden multiplier, or penalty for exploring, so the challenge remains a fixed construction test rather than a speed run.
Use touch, pointer, or keyboard
Keyboard play covers the complete construction loop. Number keys 1 through 4 hold available candidates, Q, W, E, and T address the sockets from left to right, and pressing a socket key with a held candidate places it. An occupied socket can be cleared when no candidate is held. Enter tests a completely filled train, while R restarts the game. Touch and pointer input use the same select-then-place loop, with pointer targets at least 44 pixels and visible focus and held states.
Everything runs locally in the browser. No account, download, upload, API, remote model, random service, or hardware permission is required. The shared game shell also provides Restart, best-score storage, and keyboard guidance, so beginners can use the same rules with the input method that feels most comfortable.
Understand the model’s limits
The game deliberately models only ideal same-module external spur gears for educational play. It is not engineering design software and must not be used to size a real transmission. The model omits torque, power loss, tooth stress, backlash, profile interference, shaft alignment, lubrication, noise, wear, materials, safety factors, manufacturing tolerances, and dynamic loads. The 0.75-unit contact tolerance belongs to the puzzle’s simplified geometry; it is not a manufacturing specification.
All five levels are deterministic original fixtures. Their candidate radii, tooth counts, socket coordinates, driver dimensions, and target dimensions remain unchanged between runs, so the same reasoning process works every time. For additional background, MIT OpenCourseWare’s Gears and Linkages lecture offers an engineering reference, while Tec-science’s overview of gear stages introduces related terminology. The puzzle’s own fixed board and ideal rules remain the rules used to complete each level.
If you're weighing options, Geometric Sequence Quiz for Beginners: Rules and Steps covers this in detail.