After mixing two HEX colors, review the blend ratio, exact HEX and RGB output, both endpoints, the 11-step gradient, and the medium where the color will be used. This order separates a correct calculation from a color that is merely unsuitable for its final job.
A digital blend can look reasonable in a swatch yet miss the intended emphasis, create an unsuitable interface pairing, or differ from what paint or ink would produce. Tracing the source values also makes the result reproducible instead of leaving you with an unexplained hex string.

Confirm the source colors and their order
Begin by tracing the result back to Color A and Color B. The Color Mixer accepts short hex values such as #f00, full hex values such as #3b82f6, and rgb() strings such as rgb(59, 130, 246). Extra spaces, a missing hash mark, and upper- or lower-case letters are tolerated. Each field also has a swatch for choosing a color visually.
- Source check: Confirm that both fields contain the colors you intended to combine, rather than a nearby value copied from another project.
- Order check: Remember that 0% produces pure Color A and 100% produces pure Color B. If the source colors are reversed, reverse the ratio as well.
- Format check: Make sure each value represents an opaque digital color. Alpha transparency is not part of the blend described by the tool.
Blend the colors and capture a traceable result
- Open the Color Mixer and enter the first color in the Color A field as a hex value or rgb() string, or pick it with the adjacent swatch.
- Enter the second color in the Color B field in the same way. Check that each swatch visually matches the value you expect before continuing.
- Drag the ratio slider to the required split. At 0% the result is pure A, at 100% it is pure B, and at 50% it is the exact midpoint of the two channel values. The result updates instantly.
- Read the mixed color’s lowercase six-digit HEX and RGB values in the result panel. Use the gradient bar to preview the transition across all 11 evenly spaced steps, including both endpoints.
- Click Copy to place the current result HEX on your clipboard. Keep the source values and ratio label available so the blend can be reproduced later.
Verify the exact HEX and RGB output
The result panel is the output to review, not an estimate based on appearance. Its HEX value is shown as a lowercase six-digit color, while the RGB string provides the corresponding red, green, and blue channels. A short input such as #f00 therefore gives you a complete six-digit output to copy.
Check that the HEX and RGB values represent the same current blend, and that the slider has not moved after the expected result was chosen. Because the tool rounds and clamps the interpolated channels to the 0–255 range, use the displayed values rather than trying to reconstruct the result from a visual impression.
| Review item | What to confirm | Why it matters |
|---|---|---|
| Source assignment | Color A and Color B contain the intended source colors. | Prevents a valid blend of the wrong pair from being approved. |
| Ratio | 0% is pure A, 100% is pure B, and 50% is the midpoint. | Shows which source color receives the larger weight. |
| Exact output | The lowercase six-digit HEX and rgb() string match the desired blend. | Confirms the value that will be copied into a project. |
| Gradient | All 11 evenly spaced steps appear, including both endpoints. | Reveals the transition rather than only the final swatch. |
| Blend method | Screen-light sRGB interpolation suits the intended destination. | Digital colors and physical pigments use different models. |
Sanity-check one channel calculation
A manual calculation can confirm that an unexpected-looking result is mathematically correct. The mixer applies this formula separately to each red, green, and blue channel: result = round(A × (1 - ratio) + B × ratio). The channel results are rounded to whole values and constrained to the 0–255 range.
Worked example: With Color A set to #ff0000 and Color B set to #0000ff at a 50% ratio, red becomes round(255 × 0.5 + 0 × 0.5) = 128, green remains 0, and blue becomes round(0 × 0.5 + 255 × 0.5) = 128. The result is therefore rgb(128, 0, 128), or #800080.
The clean magenta is expected from this digital model. A muddier result from physical red and blue paint does not indicate an error in the screen calculation; it reflects the difference between screen-light interpolation and pigment mixing.
Inspect the gradient rather than only the final color
The final swatch represents one position between the two sources. The gradient bar gives a broader review by displaying 11 evenly spaced blend steps, including both endpoints, so you can inspect the entire transition at a glance.
- Check the endpoints: Confirm that the first and last steps visually correspond to Color A and Color B.
- Look for abrupt changes: A transition that seems unexpectedly uneven may mean an input value was not what you intended.
- Find the useful bridge color: Look for an intermediate step that works better than the exact midpoint for a chart, gradient, icon, or interface state.
- Avoid judging accuracy by brightness alone: A mathematically correct midpoint can still look dull when two strongly saturated colors have complementary channel values.
If another gradient stop is more suitable, adjust the ratio until the result panel reaches that point and copy the updated HEX. The gradient is a preview; the result panel remains the source for the exact value you use.
Review the blend in its final context
For on-screen design
Review the mixed color beside the elements it will accompany. For a website, app, chart, or icon, check its appearance against the intended background and neighboring colors. If the result becomes text or a background, use the Color Contrast Checker to assess the pair against WCAG AA and AAA contrast rules. Correct interpolation does not guarantee that a new text and background combination will have sufficient contrast.
For paint, ink, or printed material
The Color Mixer works with digital sRGB screen values. It uses additive-style interpolation, not subtractive paint or ink mixing, and it is not a gamma-corrected optical-light model. Its output therefore cannot predict how acrylics or printer inks will combine on paper. Treat a digital blend as a reference for screen work, then validate physical results with the actual material rather than assuming the displayed HEX will reproduce on a palette or printed surface.
Record the result for consistent reuse
Save the exact HEX alongside both source values and the current ratio label. That record identifies which colors were combined, how they were weighted, and which output was approved. Using the Copy control for the HEX also avoids transcription errors that could send a slightly different color into a stylesheet, component, or design file.
The blend runs locally in your browser. No colors, values, or inputs are uploaded to a server, and the tool requires no sign-up or usage limits. Keeping the review record with the project file still helps your future self distinguish the chosen blend from nearby experimental results.
Run this final post-mix checklist
- Color A and Color B contain the intended source values.
- The ratio label reflects the emphasis you wanted.
- The HEX and RGB outputs represent the current blend.
- The gradient includes both source endpoints and 11 evenly spaced steps.
- The final swatch works in the intended on-screen context.
- A text or background pairing has been checked for contrast when accessibility matters.
- A physical-media use has not been based on this screen blend as a pigment prediction.
- The copied HEX, source colors, and ratio have been recorded for future reference.
Once those checks pass, the mixed color is ready to use as a digital value. The final review should leave you with more than a pleasing swatch: it should confirm the ratio, exact output, visual transition, application fit, and a reproducible record of the blend.
Related reading: Convert Hex to RGB in Python: Complete Code Guide.
Related reading: When to Mix Two HEX Colors for Screen Design.