Use a two-HEX color mix when you need a specific intermediate screen color between two known colors and want control over how much of each color contributes.
This need commonly appears when building a gradient, creating a lighter or darker version of a brand color, adjusting an interface state, extending a palette, or finding a neighboring shade for a chart. In each case, the important question is not simply “What color do these make?” but “Which blend ratio produces the color I need?”
For an on-screen result, the Color Mixer accepts two colors, blends them at a chosen ratio, and returns the exact HEX and RGB values. It uses direct sRGB channel interpolation, making it useful for websites, apps, icons, charts, and other digital designs.

Recognize the jobs a two-color mix solves
A blend is the right approach when you already know the two endpoint colors and want a result positioned between them. If the color you need is unrelated to both inputs, combining them will not get you closer to the intended result.
- Gradient stops: Mix two endpoint colors to create an intermediate stop that bridges a transition.
- Interface states: Blend a base color with a target color to produce a controlled variation for hover, focus, selected, or disabled treatments.
- Color scales: Move between light and dark anchors to build a sequence of related digital tones.
- Chart palettes: Create neighboring shades that belong to the same visual family while remaining distinguishable in the chart.
- Brand-color variants: Test a lighter accent or an intermediate bridge color before adding it to a design system.
The practical test is straightforward: do you have two known colors, a reason to place the result between them, and a ratio that matches the amount of change you want? If all three answers are yes, mixing is more useful than guessing at a new color by eye.
Choose a blend setup that matches the result
The ratio determines which color dominates. Color A is the starting point at 0%, while Color B becomes dominant as the slider approaches 100%. A 50% setting gives the exact midpoint of the two colors’ channel values.
| Ratio setting | Meaning | Useful for |
|---|---|---|
| 0% | Pure Color A | Confirming the starting color |
| Below 50% | Color A remains dominant | A subtle move toward Color B |
| 50% | Exact midpoint of each channel | Balanced intermediate colors |
| Above 50% | Color B becomes dominant | A stronger shift toward Color B |
| 100% | Pure Color B | Confirming the ending color |
The displayed ratio label shows the current split, such as 70% A and 30% B, so the same inputs and settings produce a reproducible result. The gradient bar also shows eleven evenly spaced steps, including both endpoints, which makes it possible to compare the overall transition before choosing a particular value.
For more detailed control over the balance between the two colors, see using the ratio slider for precise blends.
Mix two HEX colors in five steps
The workflow is designed to move from two known inputs to a copy-ready digital color without requiring conversion work between tools.
- Enter Color A. Type a short HEX value such as #f00, a full HEX value such as #3b82f6, or an rgb() string. You can also click the field’s swatch to choose the color visually.
- Enter Color B. Use the same accepted formats in the second field. Input is case-insensitive, extra spaces are ignored, and the leading hash is optional.
- Set the ratio. Drag the slider from 0% to 100%. At 0% the result is pure Color A, at 100% it is pure Color B, and at 50% it is the midpoint.
- Read and preview the result. The result panel provides the exact lowercase six-digit HEX and the matching rgb() values. Inspect the gradient bar to see the intermediate colors between the endpoints.
- Copy the HEX result. Select the Copy button to put the result’s HEX value on your clipboard, then use it in your design or stylesheet.
All color calculations happen locally in the browser. The inputs are not uploaded to a server, no sign-up is required, and there are no usage limits.
Check the output before it reaches production
A mathematically correct blend can still be the wrong design choice, so inspect both the exact values and the transition around them. Start by confirming that the two inputs were entered correctly and that the ratio label expresses the balance you intended.
- For a gradient, compare the chosen intermediate with its neighboring stops to check that the transition remains smooth.
- For an interface state, view the result against its intended background and neighboring controls.
- For a chart, make sure the new shade remains distinguishable from the other series.
- For a brand variant, treat the output as a candidate and confirm that it fits the established visual rules.
For a more detailed review, follow the guidance on how to check a mixed color result. Mixing calculates the color; it does not by itself prove that a text-and-background pair has sufficient contrast or that a palette works in every context.
The Copy control places the result HEX on the clipboard. The RGB representation remains available in the result panel for formats where an rgb() value is more convenient.
Know when screen mixing is not the right model
The Color Mixer uses simple sRGB linear interpolation. For each red, green, and blue channel, it calculates result = round(A × (1 - ratio) + B × ratio). The ratio is limited to the 0-to-1 range, and the resulting channels are constrained to 0–255 and rounded.
For example, mixing #ff0000 and #0000ff at 50% produces:
- Red: round(255 × 0.5 + 0 × 0.5) = 128
- Green: round(0 × 0.5 + 0 × 0.5) = 0
- Blue: round(0 × 0.5 + 255 × 0.5) = 128
The result is rgb(128, 0, 128), or #800080. This magenta outcome is correct for the tool’s screen-color model. The method averages sRGB channel values; it is not gamma-corrected optical light mixing and does not simulate subtractive paint or ink.
That limitation matters when matching physical materials. Real acrylics, pigments, and printer inks can behave very differently from an averaged screen color, so a digital mix should not be treated as a reliable prediction of the final material on paper. Use the result for digital design decisions, and verify physical work through an appropriate print or material test.
Apply the mixed color to common design work
Once the result passes inspection, its HEX or RGB value can be used directly in the relevant design layer. The most reliable applications give the blend a defined role rather than adding it without a purpose.
Gradient stops and transitions
For a gradient, treat the mixed color as a proposed intermediate stop. Choose two colors that belong at the ends of the transition, preview the eleven-step gradient, and copy the value that creates the balance you need. Because the preview includes both endpoints and the intermediate steps, you can see whether the blend is gradual or visually concentrated near one side.
Interface states
For a hover, focus, selected, or disabled state, mix the base color with the state’s target color and adjust the ratio until the difference is visible but controlled. A small contribution from Color B creates a modest shift, while moving closer to the midpoint produces a stronger change. The final appearance still depends on the surrounding layout and background.
Palettes and chart colors
For a palette or data visualization, adjacent source colors can define a family of intermediate tones. Use the exact output to keep the recorded value consistent across the project. Keep checking each shade in its intended context, because a smooth mathematical transition does not guarantee that every series or label will be equally easy to distinguish.
Brand-color bridges
Two established brand colors can provide the anchors for a new bridge color. This is useful when an interface needs a tone that relates to both identities. Set the ratio according to the intended visual weight, save the input colors and ratio with the design decision, and treat the output as a proposed token rather than an automatic replacement for existing brand standards.
Make the decision with a simple checklist
Use a two-HEX mix when you have two known digital colors, need a result between them, want a controllable contribution from each, and require an exact HEX or RGB value for a gradient, state, palette, chart, or brand-derived variant.
Do not rely on the same result to predict acrylic paint, printer ink, or another physical pigment. If your goal requires a ready-made multi-color palette, an exact existing brand asset, or a verified accessibility result, use a dedicated workflow for that task instead.
When the endpoints, ratio, and screen context are clear, enter the two colors, inspect the gradient, and copy the exact output. That sequence is the right way to mix two HEX colors when you need a controlled digital intermediate rather than an arbitrary new color.