Mixing two hex colors produces a rounded channel average: result = round(A × (1 − ratio) + B × ratio). The calculation is applied separately to the red, green, and blue channels, where A and B are the corresponding source values and ratio runs from 0 to 1. When you ask what result to expect when you mix two hex colors, the important point is that there is no unnamed “average color”: each channel receives a defined amount of Color A and Color B. At a 50% ratio, both colors contribute equally, so the output is the rounded midpoint of their channel values. At other ratios, the color positioned closer to the selected end receives more weight. With fixed inputs and a fixed ratio, the same displayed result is produced. The Color Mixer applies this direct sRGB interpolation and shows the resulting HEX and RGB values instantly, along with a gradient of intermediate steps. This model fits websites, apps, icons, charts, and other on-screen design, but it does not predict the subtractive behavior of paint or ink on paper. In short, expect a mathematically defined channel blend for digital colors—not the muddy or brown result often associated with physically mixing pigments.

what result should i expect when i use mix two hex colors
What Result Should I Expect When Mixing Two Hex Colors?

What the blend ratio controls

The ratio decides how much of Color B enters the blend, while Color A receives the remaining share. The Color Mixer expresses this setting as a percentage from 0% to 100%. Moving the slider to 0% returns pure Color A; moving it to 100% returns pure Color B. The midpoint gives both source colors equal influence.

“Halfway between two colors” can be misleading if you expect an average of properties such as hue, saturation, or lightness. This tool instead averages the numeric red, green, and blue channels, then rounds each result to a valid 8-bit value from 0 to 255. The output is one new digital color, not a translucent overlay or a collection of possible matches.

Ratio Color weighting Expected result
0% All Color A, no Color B Pure Color A
50% Equal Color A and Color B Rounded midpoint of each channel
100% No Color A, all Color B Pure Color B

Every position between those endpoints follows the same weighted-channel rule rather than creating a nonlinear or subjective fade. The ratio label always shows the current split, such as 70% A / 30% B, which makes a selected result easier to document and reproduce.

How the channel math creates the result

Each hex color is decoded into three 8-bit channel values before the colors are blended. The result for every output channel is calculated independently with round(A × (1 − ratio) + B × ratio). The ratio is clamped to the available 0-to-1 range, output channels remain between 0 and 255, and each final value is rounded. This is direct interpolation of stored sRGB channel numbers, not gamma-corrected optical light mixing.

A complete example shows what the midpoint means. Choose red, #ff0000, as Color A and blue, #0000ff, as Color B, then set the ratio to 0.5:

  • Red = round(255 × (1 − 0.5) + 0 × 0.5) = 128.
  • Green = round(0 × (1 − 0.5) + 0 × 0.5) = 0.
  • Blue = round(0 × (1 − 0.5) + 255 × 0.5) = 128.

The resulting color is rgb(128, 0, 128), written as #800080 in six-digit HEX: clean magenta. The value follows directly from averaging screen-light channels. It is not a prediction of what the same pigments would produce in acrylic paint on paper, where subtractive pigment behavior is involved.

This direct method is also the kind of interpolation commonly used by design tools, CSS gradients, and UI systems. That makes it useful when the mixed color needs to work as an on-screen value rather than merely resemble a physical mixture.

Get the exact mixed color

The input fields accept several common formats and tolerate minor differences in how a color is typed. A field accepts a short hex value such as #f00, a full hex value such as #3b82f6, or an rgb() string such as rgb(59, 130, 246). Extra spaces, a missing hash mark, and upper- or lowercase letters are accepted. You can also use the native swatch beside either field to select a color visually.

  1. Enter Color A. Type its hex or RGB value in the first field, or click the adjacent swatch to choose the first color visually.
  2. Enter Color B. Add the second color to the other field using the same input options.
  3. Set the blend ratio. Drag the slider from 0% to 100%. At 0% the result is pure Color A, at 100% it is pure Color B, and at 50% it is the channel midpoint.
  4. Read the result and gradient. Check the exact hex and RGB values in the result panel. The accompanying gradient bar contains eleven evenly spaced blend steps, including both endpoints, so you can preview the complete transition.
  5. Copy the hex result. Click Copy to place the result hex on your clipboard for use in a stylesheet, design file, chart, or another project.

The result and ratio update instantly as the slider moves. Because the Color Mixer works with exactly two source colors, it produces one defined result for each selected ratio rather than introducing extra blending modes or hidden adjustments.

Inspect the result before you reuse it

The result panel provides the precise output rather than leaving you to estimate it from a preview. It shows a lowercase six-digit hex value and the matching rgb() string. Treat those displayed values as the authoritative blend because they reflect the final rounded 8-bit channels.

The gradient offers a second way to evaluate the choice. Its eleven evenly spaced steps include the original colors at both ends, allowing you to see the transition as a sequence rather than as a single isolated swatch. The current ratio label tells you which part of that transition you have selected. Once the desired color appears, the Copy button places its hex value on the clipboard.

A quick sanity check can confirm that the setup is behaving as expected. Move the ratio to 0% and confirm that the output matches Color A, then move it to 100% and confirm that it matches Color B. Return to 50% for an equal-weight midpoint. If the result seems unfamiliar, check the A and B orientation first: the slider moves toward Color B, not toward whichever field was edited most recently.

Screen mixing versus physical pigment

The most important distinction is between digital color and physical material. The Color Mixer blends screen-light values in sRGB. It does not simulate the absorption, scattering, opacity, and paper interaction involved in real paint or printer ink. Consequently, a digital blend can look clean and bright even when a physical mixture of the same named pigments looks darker, browner, or less saturated.

Situation What the tool models What to expect
Website, app, icon, or chart Direct weighted sRGB channel interpolation A precise, reproducible on-screen color
Digital gradient or color scale The selected channel blend with an eleven-step preview Defined intermediate values for digital use
Acrylic, printer ink, or paint on paper No physical pigment or paper simulation Test the real materials instead of treating the screen result as a physical prediction

All color calculations run locally in your browser. The inputs and results are not uploaded to a server, so you can experiment with private brand values or unfinished palette ideas without sending them anywhere.

Choose a useful ratio for the task

Start with the outcome you need. Use an endpoint when you want one of the source colors without modification. Use 50% when both colors should have equal influence and you want the rounded channel midpoint. For a close variation, move the slider toward the color you want to preserve, then use the gradient to judge how the intermediate tone feels in context. The displayed A/B percentage gives you a precise setting to return to later.

Direct mixing is particularly helpful for several common design tasks:

  • Creating an intermediate stop for a digital gradient.
  • Building a color scale from a darker color toward a lighter one.
  • Finding a tint or shade halfway between two brand colors.
  • Sampling defined steps for a chart palette.
  • Nudging one color slightly toward another while retaining the original pair.

For more focused guidance on choosing the split, see using the ratio slider for precise color blends. Read the current A/B label before copying so the chosen result can be reproduced without searching for the slider position again.

The expected result is therefore precise: the Color Mixer applies a weighted average to each red, green, and blue channel, rounds the values, and presents the resulting digital color in HEX and RGB. Select the ratio that matches your intended contribution, inspect the gradient, and copy the exact value when it looks right.

For a deeper look, see What Beginners Should Know Before Mixing Two HEX Colors.