Screen resolution is the number of pixel positions across and down a display; what a website reports may be a CSS-pixel coordinate space rather than the panel’s native pixel grid. A display sold with a stated native resolution has a physical pixel grid, but a normal web page usually does not receive enough trustworthy information to inspect it. Browsers instead expose dimensions used for web layout, and those dimensions can change with browser zoom, operating-system scaling, window mode, and display setup.
The Screen Resolution Checker separates the values this browser exposes instead of presenting them as one potentially misleading resolution number. It reads the CSS screen, available screen area, viewport, outer browser window, device pixel ratio, and estimated device-pixel dimensions locally.

Why browser and native resolution can differ
A physical display has an addressable pixel grid, often described as its native resolution. A browser normally works with CSS pixels instead. These are coordinate units used to size and position page elements, and one CSS pixel does not always correspond to one physical panel pixel.
The relationship can be affected by operating-system display scaling, browser zoom, the compositor, remote-display software, privacy reduction, and whether the browser is using a fullscreen or windowed mode. The browser’s coordinate space can also differ when a window moves between displays in a multiple-monitor arrangement.
- A larger viewport means more CSS layout space is available, not that the physical panel contains more native pixels.
- A CSS screen value describes the coordinate space exposed to web content, not necessarily the resolution printed on the monitor’s specification sheet.
- A device-pixel calculation derived from the screen value and pixel ratio is an estimate of a backing store, not a direct panel measurement.
What each reported dimension represents
| Reported item | What it describes | Important boundary |
|---|---|---|
| CSS screen | The full width and height exposed through screen.width and screen.height. | It is a CSS coordinate space and may not equal the marketed or native panel resolution. |
| Available screen | The screen area reported by screen.availWidth and screen.availHeight. | It may exclude operating-system interface areas such as a taskbar or menu region. |
| Viewport | The page’s layout area, reported through window.innerWidth and window.innerHeight. | Window size, browser controls, side panels, and developer tools can make it smaller than the screen. |
| Outer window | The browser window dimensions reported through window.outerWidth and window.outerHeight when positive values are available. | The checker falls back to the viewport only when an outer-window value is unavailable. |
| Device pixel ratio | The browser-reported scale factor used to relate CSS dimensions to estimated device pixels. | It is not a measurement of physical DPI or panel density. |
| Estimated device pixels | The CSS screen dimensions multiplied by the device pixel ratio and rounded to whole values. | The result is deliberately labeled an estimate because scaling and other browser conditions can alter the relationship. |
| Orientation | A comparison of the reported CSS screen width and height. | It is only a numerical classification, not a reading of the device’s physical arrangement. |
The difference between viewport and outer-window values can include browser chrome, borders, side panels, developer tools, and platform-specific decorations. That difference is useful when diagnosing a responsive page because it shows how much of the browser window is available to the page itself.
Check the resolution your browser reports
Use this workflow to capture the current browser environment rather than trying to infer the monitor’s native specifications:
- Open the Screen Resolution Checker page. The tool reads the standard screen and window values exposed by the current browser.
- Compare the labeled fields. Treat CSS screen as the full exposed screen coordinate space, available screen as the area after reported operating-system exclusions, viewport as the page layout area, and outer window as the browser-frame measurement.
- Review devicePixelRatio and the estimated device-pixel dimensions. Keep the “estimated” qualification in view, because this calculation does not inspect the physical panel.
- Resize or move the browser when comparing conditions. Resizing refreshes the viewport and outer-window values, while moving the window can help reveal whether the browser exposes a different screen context. Record the condition outside the page because the checker does not save a history.
- Select Copy report. This places the visible browser values in plain text on the clipboard, allowing the baseline and comparison readings to be saved separately.
All values are read locally. The checker does not upload the dimensions, report, clipboard content, or a display identifier, and it does not retain them after a reload. That makes the copied text a convenient troubleshooting record rather than a stored account of your device.
How device pixel ratio relates to CSS pixels
The estimated device-pixel dimensions help illustrate the relationship between the browser’s CSS coordinate system and its rendering scale. They are calculated directly from the CSS screen dimensions and the browser’s reported pixel ratio:
Estimated device-pixel dimensions = round(CSS screen width × devicePixelRatio) × round(CSS screen height × devicePixelRatio).
For a CSS screen of 1440 × 900 and a devicePixelRatio of 2, the calculation is:
- Width: 1440 × 2 = 2880
- Height: 900 × 2 = 1800
- Estimated device-pixel dimensions: 2880 × 1800
This result shows the backing-store size implied by the reported values and ratio. It does not prove that the display panel has 2880 × 1800 native pixels. Display scaling, browser zoom, compositor behavior, screenshots, remote desktops, multiple panels, and privacy reduction can all prevent the multiplication from matching the physical panel’s addressable resolution.
What can change the reported values
The results describe the browser’s current coordinate environment, not a permanent identity for the monitor. Several conditions can alter the values or the relationship between them:
- Changing browser zoom or operating-system scaling can change the reported coordinate space and pixel relationship.
- Moving the window to another display can expose a different screen context in a multi-display setup.
- Entering fullscreen or changing window mode can reduce or alter the space represented by browser and page dimensions.
- Opening a side panel or developer tools can make the viewport smaller than the outer browser window.
- Remote sessions and browser privacy behavior can reduce or modify the information exposed to the page.
For a useful comparison, copy one report, make one controlled change, resize the browser if a refresh is needed, and copy the second report. Note the zoom, display, window mode, and fullscreen state separately. The difference shows that the browser’s coordinate environment changed, but it does not by itself identify whether browser zoom, operating-system scaling, window placement, or another layer caused the change.
What the browser cannot reveal
A web page does not receive enough trustworthy hardware information to make claims that require direct display inspection. The checker cannot measure:
- Physical dimensions such as inches, centimeters, the display diagonal, or pixel pitch.
- Hardware DPI, color depth, refresh rate, HDR, gamut, brightness, or panel type.
- Cable capability, GPU output mode, or EDID data.
The orientation label is similarly narrow. A greater reported CSS width is labeled Landscape, a greater height is Portrait, and equal values are Square. The label does not read an accelerometer, lock device orientation, or prove how a hinged, folded, rotated, mirrored, projected, or multi-monitor setup is physically arranged.
For native resolution, physical size, display specifications, purchasing decisions, diagnosis, or calibration, use operating-system display settings, manufacturer specifications, or dedicated hardware tools.
Which value answers your question
Choose the measurement that matches the task rather than treating every value as “the resolution”:
- Use the viewport for page layout, responsive design, or the space available to content.
- Use the CSS screen for the full screen coordinate space exposed to the browser.
- Use the available screen to compare the area that may remain after operating-system interface exclusions.
- Use the outer window when investigating the browser frame or window-level dimensions.
- Use the estimated device-pixel dimensions only to understand the backing-store calculation implied by the browser values.
- Use operating-system or manufacturer information when you need the native panel resolution or a physical measurement.
A clear resolution answer in one line
Your browser’s screen resolution is its reported width by height in CSS pixels; the viewport shows how much of that coordinate space the page can use, and the device-pixel figure is only a ratio-based estimate. Record the browser conditions with the copied report so the numbers remain meaningful when you compare windows, displays, zoom levels, or fullscreen changes.
Related reading: What Is My Screen Resolution? Pick the Right Number.