Hidato for beginners means placing the numbers 1 through 16 exactly once on a 4×4 board so every consecutive pair touches horizontally, vertically, or diagonally.
On this Lizely edition, six shaded clues—1, 2, 6, 10, 12, and 16—anchor the route. Open the Hidato puzzle to place every remaining value and create one uninterrupted path from 1 to 16; a valid complete board earns exactly 1,000 points.
Beginners should treat checking as a deliberate final action. An incomplete check records no mistake, the first wrong complete board can be repaired, but a second wrong complete check deadlocks the run until you restart.
The standard consecutive-number and eight-neighbor rules match the official Hidato introduction. The puzzle here is an original Lizely recreational fixture, not an official-site challenge or a randomly generated daily puzzle.

The rules that govern every square
Every active cell eventually contains one integer from 1 through 16, and every integer in that range appears exactly once. The six shaded clue cells are fixed: their values cannot be changed, moved, replaced, or cleared. All other cells are editable until the run reaches a terminal state.
Consecutive numbers must touch in one of eight directions: left, right, above, below, or one of the four diagonals. A valid route therefore goes from 1 to 2, then 3, and continues without a gap through 16. The path can turn and cross from one row to another; it does not have to remain in a straight line.
| Feature | Exact rule or value |
|---|---|
| Board | 4×4 with 16 active cells |
| Number range | 1 through 16, each used exactly once |
| Fixed clues | Six values: 1, 2, 6, 10, 12, and 16 |
| Allowed contact | Horizontal, vertical, or diagonal |
| Valid result | One continuous path and exactly 1,000 points |
One beginner trap is treating diagonal contact as forbidden or assuming the route must snake from one edge to the other. The location requirement for each consecutive pair is adjacency: from 1–2 through 15–16, the two cells may differ by no more than one row and one column. A completely filled grid can still be wrong if one pair is separated.
The board permits a temporary duplicate while you explore an alternative. It does not silently move or delete an earlier entry. On a complete check, the game diagnoses duplicates and also verifies that the range is exact, each value appears once, the six clues remain unchanged, and every consecutive link touches.
Solve your first 4×4 board in a deliberate order
- Orient the grid. Locate the clues 1, 2, 6, 10, 12, and 16 before entering anything. Notice which clue pairs are close and which require a longer chain of neighboring cells. Because all six clues are necessary, do not treat one as a decorative hint.
- Inspect the forced links around 1 and 2. Since 2 must touch 1 and 3 must touch 2, test the editable cells around those anchors for the next values. Keep a candidate only if it leaves room for 4 and 5 to continue toward the fixed 6.
- Work backward from 16. Test an editable neighbor for 15, then a neighbor of 15 for 14, and then a neighbor of 14 for 13. The chain must finish at the fixed 12. This direction is especially useful because 13 cannot be placed without a viable route through 14 and 15.
- Build the middle anchor. Use 6 and 10 as boundaries for the chain 6–7–8–9–10. Place 7, 8, and 9 one at a time so each touches the previous number, no value repeats, and the route can still reach 10.
- Close the short gaps. Fit 4 and 5 between 3 and 6, then place 11 between 10 and 12. If a placement appears to work locally but leaves too few cells for the required links, reject it.
- Count links when candidates look similar. Compare how many moves are available between distant clues before committing. A cell may touch its target and still be wrong because the remaining chain cannot fit between the anchors.
- Use duplicates only as temporary notes. If a duplicate helps you compare branches, leave it visible while reasoning, but clear it explicitly before checking. The game will not overwrite another value for you.
- Fill all 16 cells, then check. Read the complete route from 1 through 16 before pressing Enter. Make sure every cell has a deliberate value, every number appears once, and each shaded clue still shows its original value.
Control the board by touch or keyboard
On a phone, select an editable cell and choose its exact value from the on-screen 1–16 pad. The four-column board uses large native buttons and a constrained width intended to avoid horizontal scrolling at 390 pixels. Selecting another cell only moves the visible cursor; it does not change the board.
Keyboard play covers the whole game. Use the arrow keys to move one cell at a time, type a value from 1 through 16, press Delete or Backspace to clear the selected editable cell, and press Enter to check. To enter a two-digit value such as 14, type 1 and then 4 without moving the cursor. Moving the cursor or using a number button starts a fresh entry.
| Action | Touch control | Keyboard control |
|---|---|---|
| Choose a cell | Select an editable square | Move with the arrow keys |
| Enter a value | Use the 1–16 pad | Type a value from 1–16 |
| Correct an entry | Use Clear selected | Press Delete or Backspace |
| Check the board | Use the on-screen check action | Press Enter |
Clear selected removes an entered number but never changes a shaded clue. The shared double-Escape gesture opens the spreadsheet-style boss screen, and another double Escape returns to the puzzle. The interface also supplements color with text and accessible labels, so clue and entry status do not depend on color alone.
Check, repair, and protect your run
Once all 16 cells contain values, the validator applies the full rule set at once. It requires 16 in-range integers with no repeats, confirms every immutable clue, locates each value, and checks that every pair from 1–2 through 15–16 is separated by at most one row and one column.
- An incomplete check reports that the path is incomplete and records no mistake.
- The first incorrect complete board records one mistake but stays editable, so you can replace its editable entries and check again.
- A second incorrect complete check deadlocks the run. Restart is then required.
- A valid complete board awards exactly 1,000 points.
Completion and deadlock are terminal states. After either one, selecting cells, entering numbers, clearing, moving the cursor, and checking again cannot alter the result. Restart restores the six givens, removes player entries, resets the cursor, score, mistakes, and feedback, and starts a clean run. Elapsed time does not affect the score.
What this fixed edition does and does not offer
This board has one independently verified solution. A separate backtracking oracle over the 4×4 eight-neighbor graph finds exactly one path when all six clues are present. Removing any one clue creates at least two possible paths, which proves that each published clue is individually necessary rather than optional decoration.
The limit is also a feature for focused practice: the puzzle is fixed. Replaying it does not fetch a random daily board, so learning the route can make later attempts easier. The browser game requires no account, does not upload board state, and elapsed time does not affect the score. It is a recreational logic puzzle, not an intelligence test, medical or psychological assessment, educational placement tool, or employment screen.
For that reason, judge the solve by the rules rather than by speed. A clean route that satisfies all sixteen values and every clue is the goal; the fixed 1,000-point result confirms that exact condition.
Run a final audit before checking
Use this last pass after your deduction work is complete:
- All 16 active cells contain a number.
- The values are exactly 1 through 16, with no repeated number.
- The six shaded values still read 1, 2, 6, 10, 12, and 16.
- Every consecutive pair touches by a side or corner.
- No temporary branch note remains on the board.
- The whole route can be followed from 1 to 16 without a gap.
Only then check. This order preserves the useful repair window after one incorrect full-board attempt while avoiding an unnecessary second incorrect check.