In Fill One Line Puzzle, filling the grid means tracing one continuous orthogonal path from the numbered start through every open cell exactly once, then clearing five fixed boards for exactly 1,000 points. Each move must go immediately above, below, left, or right; diagonal jumps and revisits are not allowed. This guide covers the cell-coverage format in Fill One Line Puzzle, not a number-placement grid or an edge-tracing game.

fill the grid puzzle guide
Fill the Grid Puzzle Guide: Route Planning

Read the path constraints before moving

Every level begins on one fixed numbered square. Dark blocked squares are walls and can never be entered, while every open cell must be included in the route. You can extend the path only from its current endpoint, and the starting cell cannot be used a second time. Each selected square receives a step number, the latest endpoint receives an accent treatment, and the path-length counter shows how many open cells have been covered.

This is cell coverage, not edge coverage. An Euler-style one-line drawing can pass through a vertex more than once if the required edges are handled correctly. Here, the open cells themselves must be covered, and every open cell may appear only once. Judge the route by the numbered path and covered-cell counter rather than by whether the line visually resembles a traditional edge-tracing puzzle.

Complete the grid in a deliberate order

  1. Locate the fixed start and blocked cells. The numbered start is already the first cell of the route. Dark squares cannot be entered at any point, and the first level is an open 3-by-3 introduction that is useful for learning the controls.
  2. Choose a legal first move. Click or select an open cell immediately above, below, left, or right of the numbered start. The destination must also be unused.
  3. Extend the route from its endpoint. Click the next adjacent open cell, or hold and drag across several adjacent cells. With real pointer dragging, a square is added as the pointer enters it only when that square is open, unused, and next to the current endpoint. Touch input follows the same local rule.
  4. Follow the step numbers and counter. The numbers show the route order, while the counter confirms how many open cells are covered. This makes it easy to spot a drag that stopped at an invalid cell instead of extending the route as intended.
  5. Protect constrained cells before advancing the endpoint. Look for unvisited corners and cells with very few available neighbors. A non-start corner often needs to be approached at the right moment because leaving it may become impossible.
  6. Plan around obstacles and narrow corridors. Decide which side of a bottleneck should be completed first. Moving the endpoint can divide the remaining open area into separate regions, so route order is a central part of the puzzle.
  7. Cover every open cell before checking. Press Enter or choose Check path when the path-length counter shows full coverage. A level clears only when the path contains every open cell; checking is not a free route preview.
  8. Read the check result carefully. A first distinct incomplete check allows you to continue editing, but a second different incomplete check deadlocks the run. If the route is complete, the level clears and the fixed start of the next level is prepared automatically.

Select pointer, touch, or keyboard input

All input methods obey the same grid rules. The difference is how you extend and correct the route, not which moves are legal.

Input or control Action Result and constraint
Pointer click Select an orthogonally adjacent open cell. Adds one cell to the route when the selection is valid.
Pointer drag Hold the pointer and move across adjacent cells. Each valid square entered becomes the new endpoint.
Touch drag Drag through adjacent cells. Uses the same local interaction model as pointer dragging.
Arrow keys Attempt to move one cell from the current endpoint. A move off the board, into a wall, or onto a used cell has no effect.
Delete or Backspace Undo the latest step. Removes one route cell without removing the fixed start.
X or Reset level Reset the current puzzle. Returns to the fixed start while retaining points earned on earlier levels.
Enter or Check path Check the current route. Clears the level only if every open cell is covered.
R or Restart Restart the complete five-level run. Returns to level one with zero points and no recorded checks.

Clicking the current cell, an already visited cell, a blocked cell, a nonadjacent cell, or a position outside the board does nothing. These invalid selections do not change the path and do not count as checks. The native buttons also maintain touch targets of at least 44 pixels, giving touch users a practical alternative to precise dragging.

Prevent dead ends before they become irreversible

A route is built as a chain, so the order of moves matters. The current endpoint is the only active tip, and a used cell cannot be crossed again. Extending from that tip can isolate a corner or separate the remaining open cells into regions that can no longer be joined by one continuous path.

Before committing to a difficult move, scan the board for unvisited corners and cells with very few unused neighbors. The goal is to reach each constrained cell while it still has a legal connection to the endpoint. Entering a non-start corner at the wrong moment can make it impossible to leave it and continue the route.

Obstacles create bottlenecks as well. In a narrow passage, consider which side needs to be completed first and whether the current move would seal off the other side. These checks are more reliable than extending several cells and waiting for the game to identify a dead end.

Fill One Line Puzzle does not reveal the next square, complete the remaining route, or replace your decisions with an automatic solution. The game does not supply a route hint, so the ordering of the path remains your responsibility.

Use the two-check rule safely

Checking is deliberate because each distinct incomplete path is recorded as an exact level-and-path signature. The result depends on whether the route is complete and whether the checked path differs from the previous incomplete one.

Path and action What happens Can play continue?
Complete route The level clears, awards 200 points, and prepares the next fixed start. Yes, with the next level.
First distinct incomplete check The exact level-and-path signature is recorded. Yes; you may extend, undo, or reset.
Recheck of the identical unchanged incomplete route No additional error is added. Yes, with the same route.
Second different incomplete check The run enters a deadlock. No; Restart is required.

The important limitation is that changing the route after the first incomplete check and then checking another incomplete path counts as the second different incomplete check, even when the change came from Undo or Reset level. You can still repair the puzzle and check a complete route; the deadlock applies only when that later check is still incomplete.

A completed or deadlocked path cannot be changed with movement, selection, undo, reset-level, or check commands. A deadlock therefore requires a full Restart rather than another attempt to edit the same path.

Scoring is exact: 5 cleared levels × 200 points = 1,000 points. The first four clears contribute 800 points, and the fifth clear adds the remaining 200.

Recover from mistakes without losing earlier progress

Use Undo when a recent move has separated the route from an unvisited cell. Each Undo action removes one step, so you can return to the exact point where the route became difficult without clearing the whole level. Delete and Backspace provide the same step-by-step correction from the keyboard.

Reset level is the broader recovery option. It returns the current board to its numbered starting square but keeps points already earned on earlier levels. Restart or R starts a completely fresh five-level run at level one with zero points, no recorded checks, and the original starting path.

Know the limits of the fixed puzzle set

All five boards are original, fixed grids with distinct obstacle arrangements and fixed starting cells, so each attempt is reproducible. The first level provides an open 3-by-3 introduction. Later levels introduce tighter obstacles, constrained corners, narrower corridors, and longer routes. An independent depth-first search test enumerates legal orthogonal paths from each fixed start and confirms that every board has a valid route covering all open cells exactly once.

That verification establishes internal solvability and checks the declared solution routes; it does not mean the levels come from a published puzzle collection. The game also does not display an automatic answer after an incorrect route.

Fill One Line Puzzle runs entirely in the browser. It does not upload a board, request an account, call an external API, or use a paid service. When browser storage is available, the best completed score is kept locally. The game shell also includes a boss key: double-Escape temporarily replaces the board with a spreadsheet-style cover, and pressing Escape twice again returns to the game. The puzzle is recreational route-planning practice, not an intelligence, educational, psychological, or medical assessment.

If you're weighing options, Light Burst Game: New Cells or a Planned Route? covers this in detail.

If you're weighing options, Flood It Benefits: Strategy Practice in an 8-Move Puzzle covers this in detail.