Domino chain reaction rules require every handoff to share an edge: a falling tile can trigger only the upright tile directly above, right, below, or left of it. Diagonal contact never carries the reaction, and an empty gap stops that branch.

These rules define an abstract grid puzzle rather than a simulation of physical dominoes. In Domino Chain Reaction, you place a limited set of upright dominoes, push the fixed START tile, and try to build a continuous route to the goal bell. The game contains five original 5-by-5 workbenches with visible placement slots and strict per-board tile budgets.

domino chain reaction rules
Domino Chain Reaction Rules: A Complete Grid Puzzle Guide

Core rules and official board values

Every workbench follows the same visible rules, so checking one board teaches you how to read all five. The fixed endpoints remain in place, while only the available slots accept upright dominoes.

Rule or value What it means
Workbenches Five original, fixed 5-by-5 grids.
Fixed endpoints Each board has one START tile and one goal bell.
Placement Tap or click an open slot to place an upright domino; use the same action to remove it.
Tile budget Each board has a strict placement allowance. START and the goal do not consume it.
Valid handoff A reached tile can trigger a tile directly above, right, below, or left of it.
Invalid handoff Diagonal contact does not count, and an empty cell stops that branch.
Push order Propagation is a deterministic breadth-first traversal from START, checking neighbors up, right, down, then left.
Success Reaching the goal awards 200 points and unlocks the next workbench.
Failure The test stops when no newly connected upright tile remains, revealing how far the chain traveled.

The open slots look identical before a push, so the board does not mark a correct route or reveal the future fall order. You must infer a useful chain from position, shared-edge adjacency, and the number of pieces available. That limitation makes Push a genuine test rather than a decorative success button.

How to place and test a chain

Use the two fixed endpoints to narrow the route before spending tiles. The following workflow turns the adjacency rules into a repeatable placement process.

  1. Inspect the workbench. Locate START, the goal bell, the available open slots, and the displayed tile budget. Check which cells are closed or fixed before choosing a path.
  2. Find the start-side options. Identify open slots that share an edge with START. These are the only placed tiles that can receive the first reaction.
  3. Find the goal-side options. Identify open slots that share an edge with the goal bell. Work backward from these positions as well as forward from START.
  4. Bridge the gap. Compare the relevant rows and columns, then estimate the placements needed to cover the remaining Manhattan distance. The proposed route must contain a continuous series of cells with shared edges.
  5. Place only useful tiles. Add upright dominoes while staying within the budget. Do not spend every available piece merely because pieces remain; each domino should support the route or form a branch you understand. A corner can redirect the chain through one orthogonal turn without requiring a special tile type.
  6. Audit every transition. Trace the route one cell at a time. Confirm that each consecutive pair touches along a full top, right, bottom, or left edge, and remove any disconnected piece that does not serve a deliberate purpose.
  7. Push the start. Select Push the start. The engine runs the real ordered traversal, marks every reached tile, and stops when it reaches the goal or exhausts the connected upright tiles.
  8. Read the result and revise. On success, continue to the next workbench. On a stopped layout, find the last reached position, identify the gap or stranded branch, change at least one tile, and test a genuinely different arrangement.

What the push and numbered order reveal

Push performs an actual breadth-first traversal beginning at START. Its neighbor order is fixed: up, right, down, and left. Each reached tile is recorded, rotated into a fallen state, and numbered on the board. The Fall recorder also repeats the observed sequence as compact position labels.

A successful test stops as soon as the goal is reached. A failed test stops when there is no newly connected upright tile to trigger. The numbered sequence therefore shows the route the engine really used, including any gap or branch that failed to continue. It does not show a hidden answer in advance because the open slots contain no route markers, future-order labels, or solution fields.

The numbering reflects the game’s deterministic traversal, not elapsed time, momentum, or the direction in which a real row of tiles would physically topple. When a chain stops early, use that last numbered position as the boundary of your next design. For a focused follow-up on diagnosing the break, see Can You Fix a Failed Chain Reaction Trigger?

How attempts, points, and reset work

The attempt system distinguishes an accidental repeated test from a genuine new mistake. This matters because a single failed layout still leaves room to correct the route, while a second different failure closes the run.

Event Result
Goal reached The level awards 200 points and unlocks the next workbench.
Identical stopped layout tested again The placement signature is deduplicated, so it does not count as another distinct failure.
Corrected layout succeeds after one failure The failure history is cleared before moving to the next workbench.
Second genuinely different layout stops short The run closes.
All five levels succeed The final result is frozen at exactly 1,000 points.
Restart The game returns exactly to level one with zero score, no placed tiles, no fallen sequence, no recorded layouts, and no terminal state.

The full-score calculation is 5 successful levels × 200 points per level = 1,000 points. A stopped layout does not award points for the partial cascade. Because repeated identical layouts are deduplicated, an accidental double press does not consume the second failure, but a real revision must change at least one tile.

Planning routes on the fixed grid

Treat each placed domino as a point in a small graph and each shared edge as a possible link. Starting from both ends prevents a route from drifting toward the wrong part of the board. Identify the slots adjacent to START, identify those adjacent to the goal, and work inward until the remaining row-and-column gaps are covered by the number of tiles still available.

Corners deserve special attention because a single 90-degree turn can redirect the chain without consuming a special connector. Extra branches are not automatically useful: a branch that never rejoins the route simply uses part of the budget. Before pushing, verify both the main route and every branch you intend to keep.

The five levels introduce the rules gradually. The first presents a short direct handoff. Later workbenches add downward travel, shelf-like turns, switchbacks, and a longer final cascade. The board dimensions remain constant, so the increasing difficulty comes from spatial reasoning rather than changing controls or changing the adjacency rule.

Mouse, touch, and keyboard controls

With a mouse or touchscreen, tap or click any open slot to place a domino, and tap or click it again to remove that domino. Keyboard play is scoped to the board: focus a grid cell, use the arrow keys to move the visible cursor, press Space to toggle an available slot, and press Enter to push. Native behavior remains available on Restart, Push, and Next workbench controls.

Invalid actions do not partially alter the puzzle. Closed spaces, attempts to use fixed endpoints, out-of-range cells, budget overflow, pushes on solved levels, and input on a terminal run are atomic no-ops: score, placement state, and the observed sequence stay unchanged. Tile targets remain at least 44 pixels high, and the complete board fits comfortably in a 390-pixel mobile viewport.

The game runs entirely in the browser. Placement choices, pushes, fall sequences, scores, and mistakes are not uploaded for processing, and no account, subscription, server request, or additional download is required.

What the puzzle does not model

Domino Chain Reaction models explicit grid adjacency rather than the physics of real tiles. It makes no claim about timing, momentum, spacing, friction, curved runs, irregular surfaces, or the precise moment at which a physical domino would strike its neighbor. All five puzzle boards and their propagation rules are original product fixtures rather than copied external levels.

For background on the traditional tile game, The Strong National Museum of Play’s dominoes overview provides historical context, but the browser puzzle follows its own visible edge-adjacency rules. This makes the game suitable as a compact route-planning exercise, an introduction to graph traversal, or a visual reasoning challenge where every placement has a visible consequence after the push.

If you're weighing options, Dominosa for Beginners: Rules, Controls, and First Moves covers this in detail.