To convert RGB to HSV, enter red, green, and blue as whole numbers from 0 to 255; the result is hue in degrees plus saturation and value as percentages.
The RGB to HSV Converter performs that conversion locally in your browser. It also displays normalized HSV notation, the corresponding source HEX code, and a visual swatch so you can compare the numerical result with the original color.

What the three HSV values mean
RGB describes a color through the amounts of red, green, and blue light it contains. HSV reorganizes the same color around three different properties: hue, saturation, and value. The transformation changes the coordinates used to describe the color, not the underlying 8-bit RGB triplet.
Hue identifies a position on the color wheel. Its reference positions include red at 0°, yellow at 60°, green at 120°, cyan at 180°, blue at 240°, and magenta at 300°. Hue therefore describes the color family or direction around the wheel rather than how bright or muted that color appears.
Saturation measures how far the color sits from the gray axis relative to its value. A saturation of 0% produces a gray, while higher percentages represent more saturated colors. Value is the largest normalized RGB channel, so it follows the strongest channel in the triplet. It is not the same measurement as HSL lightness or measured luminance.
Convert an 8-bit RGB triplet
- Enter the three channels. Type whole-number red, green, and blue values from 0 through 255 into the RGB to HSV Converter. The original inputs remain visible, making it easy to adjust one channel and compare how each HSV component responds.
- Select Convert to HSV. The converter normalizes each channel by dividing it by 255, then calculates the hue, saturation, and value coordinates.
- Read the result. Hue appears in degrees on a 0-to-less-than-360 scale, while saturation and value appear as percentages. The normalized notation, source HEX code, and visual swatch appear alongside the displayed values.
- Confirm the destination format. Before copying, check whether the receiving application expects degrees and percentages, fractional values, or a compact integer range.
Input validation is intentionally strict. Only finite whole-number channels from 0 through 255 are accepted. Decimal values, empty fields, negative numbers, and values above 255 produce an explicit error instead of being silently rounded or clamped. This prevents a mistyped 8-bit channel from becoming a plausible but different color.
Read the displayed numbers accurately
Internally, every channel is divided by 255 before the HSV components are calculated. Hue remains in the nonnegative degree range with a lower bound of zero and an upper bound below 360. Saturation and value are calculated as zero-to-one numbers and then displayed as percentages.
The interface rounds hue, saturation, and value to two decimal places for readability, while the underlying calculation retains an unrounded JavaScript number until formatting. Because another program may round or format the result differently, do not assume that a copied display string will be byte-for-byte identical to that program’s internal value.
The generated HEX representation uses two lowercase hexadecimal digits for every validated channel. A color swatch provides a quick visual check of the source value. These output conventions align with the Android Color.colorToHSV documentation, while the implementation is independently checked against R’s rgb2hsv documentation for typical 0–255 sRGB input.
Match the destination’s expected scale
The same HSV color can be represented in several numeric conventions. A percentage-based color picker, a JavaScript API, and a compact image-processing library may all expect different forms of the same coordinates.
| Destination convention | Hue to enter | Saturation to enter | Value to enter |
|---|---|---|---|
| Degrees and percentages | Keep the displayed value, where 0 ≤ H < 360° | Keep the displayed 0–100% value | Keep the displayed 0–100% value |
| Degrees with fractional saturation and value | Keep the displayed degree value | Divide the displayed percentage by 100 | Divide the displayed percentage by 100 |
| Fully fractional HSV | If the destination specifies fractional hue, divide the degree value by 360 | Divide the displayed percentage by 100 | Divide the displayed percentage by 100 |
| Compact integer range | Follow the destination’s documented scale; some software uses 0–179 or 0–255 for hue | Use the destination’s integer mapping | Use the destination’s integer mapping |
For example, a saturation displayed as 80.90% corresponds to approximately 0.809 in an API that expects a fraction. Entering the integer 80 is correct only when the program explicitly defines that field as a percentage.
If the destination expects HSL, do not relabel the HSV value component as lightness. HSL lightness and HSV value use different definitions, so use an HSL-specific conversion instead.
One conversion, step by step
Consider the RGB input red 39, green 120, and blue 180.
- Normalize the channels. Divide each channel by 255 to obtain approximately 0.152941, 0.470588, and 0.705882.
- Find the maximum, minimum, and difference. The maximum is 0.705882, the minimum is 0.152941, and their difference is 0.552941.
- Calculate value and saturation. Value is the maximum, or 70.59%. Saturation is the difference divided by the maximum, which gives 78.33%.
- Calculate hue from the maximal channel. Blue is the largest channel, so the blue-branch hue formula is H = 240 + 60 × (R − G) ÷ delta. Substituting the original channel differences gives 240 + 60 × (39 − 120) ÷ (180 − 39) = 205.53°.
The resulting HSV values are therefore hue 205.53°, saturation 78.33%, and value 70.59% when displayed to two decimal places.
Handle black, gray, and equal-channel inputs
When red, green, and blue are equal, the color is achromatic: the channel difference is zero, so saturation is 0%. Hue has no visual meaning because there is no distinct color direction around the wheel. The converter follows the common convention of reporting a placeholder hue of 0° rather than inventing a meaningful angle.
Black is handled separately because its maximum channel value is zero, which would otherwise cause a division-by-zero condition in the saturation formula. Its saturation and value are both 0%, and its hue uses the same achromatic placeholder of 0°. The same equal-channel rule applies to middle gray, white, and every other gray made from identical RGB values.
Know what the conversion does not include
HSV value tracks the strongest normalized RGB channel rather than perceived brightness. It should not be treated as a substitute for HSL lightness, measured luminance, or an accessibility judgment. Conversion alone cannot tell you whether text will remain readable against a particular background.
Alpha is outside the scope because transparency does not change the RGB-to-HSV calculation for the underlying three channels. The converter also does not read embedded image profiles or convert between wide-gamut color spaces. It performs a defined coordinate transformation for ordinary 8-bit sRGB-style input rather than offering a full color-management workflow.
All processing happens entirely in the browser, and the tool does not save a color history. Its output is a numerical representation and visual swatch, not a subjective color name or a design recommendation.
Put the converted color to work
HSV coordinates are useful for CSS exploration, graphics scripting, teaching, comparing palette coordinates, and transferring an 8-bit RGB sample into an HSV-based control. If the next task is to build related colors from the converted base, the Color Palette Generator is separate from this converter; confirm its documented support for base colors and scheme types before relying on it.
Before using the final color for interface text, test the actual foreground and background pair with the Color Contrast Checker. Hue, saturation, and value can describe a color precisely, but they do not establish its contrast or readability against another color.
For a deeper look, see Convert HEX to RGB in Excel: Formulas and Steps.
For a deeper look, see Convert Hex to RGB in JS: Reusable JavaScript Code.