The area of a trapezium is A = (a + b)h/2, where a and b are the lengths of the two parallel sides and h is the perpendicular distance between them.
In this guide, a trapezium is a four-sided shape with one pair of parallel sides—the same geometry called a trapezoid by the Trapezoid Area Calculator. Once you identify the two bases and measure the perpendicular height, the remaining task is a short calculation.

What the Formula Represents
Adding a and b gives the combined width of the two parallel bases. Dividing that sum by two gives the average base length. Multiplying the average by h gives the area enclosed by the shape.
The formula averages the two parallel base lengths and multiplies that average by the perpendicular height. The result remains A = (a + b)h/2. This is the standard relationship described in OpenStax’s prealgebra lesson on trapezoids and Wolfram MathWorld’s trapezoid reference.
Measure the Bases and Height
Accurate measurements matter as much as the arithmetic. Before calculating, check each part of the figure carefully.
- Identify base A and base B. These must be the two parallel sides. The remaining sides do not enter the area formula directly.
- Measure the perpendicular height. Draw or imagine a line from one base to the other that meets both at a right angle.
- Use one unit throughout. Both bases and the height must use the same measurement unit.
- Sketch the measurements. Labeling the bases and the right-angle height helps prevent a slanted side from being used by mistake.
A slanted leg or diagonal is not the height unless it happens to be perpendicular to the bases. If the bases are tilted, do not assume that a vertical line on the page is the perpendicular distance.
Calculate the Area by Hand
Use the formula after recording all three measurements. For example, suppose the parallel bases are 8 metres and 4 metres, and the perpendicular height is 3 metres.
- Set a = 8 m, b = 4 m, and h = 3 m.
- Add the bases: 8 m + 4 m = 12 m.
- Find the average base: 12 m ÷ 2 = 6 m.
- Multiply the average by the height: 6 m × 3 m = 18 m².
The trapezium area is therefore 18 m². The answer is written in square metres because area has two length dimensions.
Find the Area in the Browser Calculator
The Trapezoid Area Calculator performs the same formula and returns the area in both the selected square unit and square metres. Use this workflow:
- Enter the lengths of the two parallel bases using the same measurement unit.
- Enter the perpendicular height between the bases and select the shared length unit.
- Select Calculate to read the approximate area in the selected square unit and in square metres.
| Input or output | Requirement | Purpose |
|---|---|---|
| Base A | Nonnegative length | First parallel side |
| Base B | Nonnegative length | Second parallel side |
| Perpendicular height | Greater than zero | Shortest perpendicular separation between the bases |
| Shared unit | mm, cm, m, km, in, ft, yd, or mi | Applies to all three measurements |
| Area result | Approximate value | Shown in the selected square unit and m² |
Parsing, conversion, formula evaluation, and formatting happen locally in the current browser tab. Measurements, units, and results are not uploaded to Lizely. Editing any measurement or changing the unit clears the previous result or error, helping prevent an old answer from being mistaken for the updated calculation.
Keep Length Units and Area Units Straight
The chosen unit controls both the input interpretation and the first area output. When the inputs are in centimetres, the selected-unit result is in cm²; when they are in feet, it is in ft². The calculator squares each length conversion factor when producing the square-metre equivalent.
| Selected length unit | Selected area unit | Exact square-metre relationship |
|---|---|---|
| Millimetres | mm² | 1 mm² = 0.000001 m² |
| Centimetres | cm² | 1 cm² = 0.0001 m² |
| Metres | m² | 1 m² = 1 m² |
| Kilometres | km² | 1 km² = 1000000 m² |
| Inches | in² | 1 in² = 0.00064516 m² |
| Feet | ft² | 1 ft² = 0.09290304 m² |
| Yards | yd² | 1 yd² = 0.83612736 m² |
| Miles | mi² | 1 mi² = 2589988.110336 m² |
These relationships use international inch, foot, yard, and mile factors rather than the retired U.S. survey foot. Do not mix metres with centimetres or feet with inches in the three fields. Convert the measurements first if necessary, then use the same unit throughout.
Input Rules That Can Prevent a Result
The calculator uses strict, locale-neutral numeric syntax so that a measurement is interpreted consistently. Several details matter when entering values.
- Accepted number format: Each field accepts decimal digits, one optional decimal point, an optional leading sign, and optional e or E scientific notation.
- Whitespace: Surrounding whitespace is ignored, but embedded spaces are rejected.
- Rejected content: Commas, typed unit names, arithmetic expressions, hexadecimal values, Infinity, and NaN are not accepted. Enter the number by itself.
- Sign rules: Bases must be nonnegative. Negative lengths are rejected rather than silently changed. The height must be greater than zero because a zero-height figure does not describe a two-dimensional trapezoid for this calculator.
- Range rules: Every nonzero measurement must remain within 1e-150 through 1e150 when normalized in both the selected unit and metres. A numeric-range failure produces no area instead of a silent zero or Infinity.
- Input length: Each raw field has a 100 UTF-16-code-unit budget. An overlong entry reports an error rather than being silently truncated.
A base may be zero, which supports the triangular limiting case. If both bases are zero, the area is zero, but the height still must be positive. These rules make the zero policy explicit rather than returning a misleading geometric result.
Check the Formula and the Final Number
A calculator result should agree with the hand calculation after rounding is taken into account. If the two answers differ, check the height first, then confirm that all three inputs use the same unit, and finally verify the addition and division in the formula.
- Reversing base A and base B does not change the answer because the formula adds them.
- When the bases are equal, A = (a + b)h/2 reduces to the familiar rectangle or parallelogram rule A = bh.
- When one base is zero, the formula gives the corresponding triangle area.
- For a symmetric shape, the equal sloping sides do not replace the perpendicular height; the dedicated step-by-step isosceles trapezoid area guide shows how the same base-and-height method applies.
The calculator uses double-precision floating-point arithmetic. Displayed measurements and results are approximate, use an approximation mark, and show at most six significant digits, while the underlying calculation remains unrounded until display. It is suitable for education, estimation, layouts, and ordinary planning, but it does not account for measurement uncertainty, surveyed land boundaries, curved sides, nonparallel quadrilaterals, or certified metrology.
Related reading: Equilateral Triangle Area: Accurate Calculator Steps.