When you create an LRC file, choose the first timestamp as the elapsed moment your first lyric should appear and the interval as the time between successive lyric lines. The first timestamp sets the global offset for the whole file; the interval sets the spacing from one display event to the next. Each later row is placed at the starting time plus its line offset multiplied by the interval. The LRC File Generator applies this rule deterministically, but it does not listen to audio, detect speech, or calculate performance timing. Measure the first timestamp against the exact recording, including any instrumental introduction before the first lyric. Use a fixed interval when the lyric onsets are reasonably even, and treat the result as a draft when phrases vary in length or pauses. For centisecond precision, the start uses MM:SS.xx with two or three minute digits, exactly two second digits, and exactly two centisecond digits. The interval can range from 0.01 to 600.00 seconds with no more than two decimal places. Choose both values for the intended playback workflow, then check the first and last timestamps before treating the download as finished.

how do i choose first timestamp and interval when using create lrc file
How to Choose the First Timestamp and Interval for LRC

First Timestamp vs. Interval: What Each Controls

These settings solve different timing problems. The first timestamp answers, “At what point in the recording should the first line begin?” The interval answers, “How much time should separate each pair of line starts?” Neither setting represents the total song duration, and the interval is not a configurable display duration for an individual lyric.

Measure the first timestamp against the player’s elapsed-time display for the same recording you will use for playback. If the player starts the track at zero, the first timestamp should correspond to that same timeline. If an intro plays before the vocals, its elapsed time remains part of the offset; you should not restart the timeline merely because the lyrics begin later.

Use the interval to describe the spacing of your lyric events. A smaller value places successive lines closer together, while a larger value spreads them farther apart. Neither choice automatically accounts for a long instrumental break, a rapid repeated phrase, or a line that should remain visible longer than its neighbors.

Timing choiceWhat it controlsBest selection rule
First timestampThe global position of the first timed lyricUse the elapsed time on the exact recording when the first lyric should appear
IntervalThe gap added between each pair of timed linesUse the typical line-onset gap, then retime exceptions later

Enter one non-empty lyric line for every display event. Blank input rows are removed, so a blank row cannot create a deliberate pause in the generated schedule. This matters when planning timing: spacing between two retained rows is determined by the configured interval, regardless of any blank lines you originally placed between them.

Match the Two Values to the Exact Recording

Anchor the start to the playback timeline

Open the same recording in the player or editor where you plan to test the lyrics. Locate the first lyric you want displayed and note its elapsed position. That position becomes the first timestamp. Avoid calculating from the first chorus, a clipped excerpt, or a different mix, because edits, fades, and alternate introductions can move the vocal entrance.

The minute field permits long tracks without introducing hour notation. Its required two-or-three-digit format also means that the start is always expressed as minutes, seconds, and centiseconds. Confirm that the seconds field falls from 00 through 59 and that the final two digits represent the intended fraction of a second.

Estimate the interval from line onsets

Listen for the point at which each line starts, rather than how long it remains on screen. Compare several representative transitions to find a reasonable typical gap. If most lines begin at a fairly consistent pace, that gap is a useful fixed interval. If the performance alternates between short and long phrases, choose a middle value that gives you a workable baseline and plan to edit the outliers.

The interval is independent of line length. A long sentence does not automatically receive more time under a fixed-interval schedule, and a short line does not receive less. Similarly, the interval is not derived from tempo or the number of words in a line. It is simply the amount added between successive timestamps.

Plan for uneven timing

A fixed interval cannot represent every pause and acceleration in a real performance. The tool does not identify beats, transcribe speech, align phonemes, or estimate vocal entrances. Once the draft exists, compare it against the recording and change individual timestamps wherever the regular spacing no longer matches the lyric onset.

For a closer look at the offset-plus-interval calculation, the LRC timestamp-math walkthrough explains how centisecond values are added without introducing a separate timing method.

Generate the LRC File from Your Lyrics

  1. Enter the lyric lines. Paste 1–500 non-empty lines, using one line for each display event. The lyric input may contain up to 50,000 characters, with no more than 500 characters on one line. Blank rows are removed, Windows, old Mac, and Unix line endings are normalized, and disallowed control characters are rejected. Spelling, punctuation, capitalization, language, and copyright notices inside ordinary lyric rows are not rewritten.
  2. Set the first timestamp. Enter the start in MM:SS.xx form. It must contain two or three minute digits, exactly two second digits from 00 through 59, a period, and exactly two centisecond digits. Supported timestamps run through 999:59.99.
  3. Set the interval. Choose a value from 0.01 through 600.00, with no more than two decimal places. The interval is converted to an integer number of centiseconds before any rows are produced, so repeated additions do not accumulate binary floating-point drift.
  4. Add optional metadata when useful. Title, artist, and album values become the ti, ar, and al tags. Each field is trimmed, limited to 120 characters, and cannot contain square brackets or control characters. Empty metadata fields are omitted.
  5. Generate and inspect the preview. The preview contains the complete simple LRC text rather than a shortened sample. Check that every expected lyric row has a timestamp and that the metadata appears as intended. Editing any input clears the previous preview so that stale output is not mistaken for the current result.
  6. Download the exact preview. The downloaded file contains the same text shown in the preview and is saved as UTF-8 without a byte-order mark. Its filename comes from the title when available, with unsafe filename punctuation converted to hyphens; a blank title produces synced-lyrics.lrc.

Check the Preview and Timing Limits

Inspect the first timestamp to confirm that the lyric begins at the intended point in the recording. Then inspect the last timestamp because the same interval is carried through every row. The generator uses this relationship:

timestamp for a row = first timestamp + (row number - 1) × interval

For one complete example, suppose the first timestamp is 00:12.34 and the interval is 2.50 seconds:

  • First row: 00:12.34 + 0 × 2.50 = 00:12.34
  • Second row: 00:12.34 + 1 × 2.50 = 00:14.84
  • Third row: 00:12.34 + 2 × 2.50 = 00:17.34

Because the interval is stored as whole centiseconds before row generation, the same spacing is maintained across the file. If the final calculated timestamp would exceed 999:59.99, generation fails instead of silently truncating the schedule. Review the first and last preview values before downloading so that an unsuitable start or excessive total span is caught immediately.

Keep the Simple Format Player-Ready

LRC is a de-facto family of formats rather than a formal universal standard. This generator implements a conservative simple subset: a bracketed MM:SS.xx timestamp followed by each lyric line, with optional ti, ar, and al metadata. The simple timestamp structure is documented in QuickLRC’s LRC file format guide, while the minute, second, and centisecond components are also described in Subforge’s LRC time implementation.

The output does not include hour fields, colon-separated frames, three-digit milliseconds, enhanced word-level angle-bracket timestamps, karaoke duet markers, or player-specific extensions. Music players can differ in their handling of metadata tags, timestamp precision, encoding, long minute values, and enhanced-LRC extensions. A file that works in one player may therefore need a different editor workflow or export setting in another.

Use the conservative output for broadly compatible synchronized lyrics, but always test the downloaded file in the target player. Confirm that the first line appears at the right moment, later lines advance correctly, and any title, artist, or album information displays as expected.

Refine the Draft Against the Recording

Open the downloaded file beside the exact recording and play from a point before the first lyric. Check each line at its onset rather than judging only the overall scroll speed. Adjust individual timestamps in the target player or a dedicated LRC editor whenever a phrase starts earlier or later than the fixed schedule predicts. Save the revised file and test it again in the player that matters.

This two-stage method keeps the initial formatting deterministic while leaving realistic vocal timing under your control. The generator handles repeated timestamp arithmetic and consistent file formatting; the final editing pass handles musical pauses, uneven phrases, and other details that cannot be inferred from text alone.

Your lyric text and the timing calculation remain in the current browser tab. The tool does not upload lyrics to Lizely, store them in an account, or send them to an AI service. It also does not supply copyrighted lyrics, search a catalog, identify a song, confirm ownership, or grant a synchronization license. You must have permission to reproduce and distribute any lyric text you enter.

For a deeper look, see How Do I Choose the Right Approach to Generate an LRC File.