To generate an LRC file when using Create LRC File, enter 1–500 non-empty lyric lines, choose a first MM:SS.xx timestamp and a 0.01–600.00-second interval, then generate, inspect, and download the UTF-8 file.
Use the generated file as a synchronized-lyrics draft rather than an automatic transcription. The LRC File Generator assigns the same time gap between successive lines, while lyric text and timing calculations remain in the current browser tab. You can later open the file beside the exact recording and correct individual timestamps in a compatible player or dedicated editor.

What the generated LRC contains
LRC is a de-facto family of formats rather than a formally universal standard. This generator produces a conservative simple subset in which a bracketed centisecond timestamp appears immediately before each lyric line: [mm:ss.xx]Lyric text. The QuickLRC LRC format reference documents this widely used structure, although individual players may support different portions of the broader format.
| Input or output part | Supported form | Purpose |
|---|---|---|
| Lyric content | 1–500 non-empty rows, up to 50,000 total input characters, and 500 characters per line | Creates one timed display event per row |
| First timestamp | MM:SS.xx with two or three minute digits, seconds from 00 through 59, and exactly two centisecond digits | Sets the time assigned to the first lyric line |
| Line interval | 0.01–600.00 seconds with no more than two decimal places | Sets the gap between successive lyric lines |
| Metadata | [ti:value], [ar:value], and [al:value] | Stores an optional title, artist, and album |
| Downloaded file | UTF-8 .lrc text without a byte-order mark | Matches the complete text shown in the preview |
Title, artist, and album values are trimmed and limited to 120 characters each. They cannot contain square brackets or control characters, and empty fields are omitted. A blank line separates the metadata from the timed lyrics. Ordinary lyric text is not changed for spelling, punctuation, capitalization, language, or copyright notices.
The output deliberately excludes hour fields, colon-separated frame timestamps, three-digit milliseconds, enhanced word-level angle-bracket timestamps, karaoke duet markers, and player-specific extensions. It therefore works best when a basic line-synchronized file is sufficient.
Prepare lyrics and timing controls
Paste the lyrics into the lyric field with one display line in each row. A paragraph break should only be used when a new display event is needed. Windows, old Mac, and Unix line endings are normalized, blank rows are removed, and disallowed control characters are rejected instead of being inserted into the output. This prevents accidental formatting characters from producing inconsistent playback behavior.
The first timestamp represents the moment the opening lyric should appear. Its minute field must contain two or three digits, its second field must contain exactly two digits from 00 through 59, and its final field must contain exactly two centisecond digits. Timestamps are supported through 999:59.99, but player support for long minute values can vary.
The interval controls the number of seconds added after each line. It is converted to an integer number of centiseconds before any rows are produced, preventing floating-point drift during repeated additions. If the final calculated timestamp would exceed 999:59.99, generation fails instead of silently truncating the file. Reduce the starting time or interval if that limit is reached.
Generate, review, and download the file
- Open the LRC File Generator and locate the lyric input field.
- Enter the lyrics in order, using one non-empty row for each line you want the player to display. Treat each row as plain lyric text because the generator adds its own timestamp.
- Set the first timestamp in MM:SS.xx form to the approximate time when the first line should appear.
- Choose the interval used between successive lines. Use it as an initial estimate rather than assuming every lyric will remain perfectly spaced.
- Add a title, artist, or album if needed. Remove empty optional fields, and avoid square brackets or control characters in their values.
- Generate the file, then inspect the complete preview. Check the first and last timestamps, confirm that every lyric row has one timestamp, and verify any metadata tags. Editing an input clears the previous preview, so generate again after making changes.
- Download the .lrc file. The saved text is identical to the preview and uses UTF-8 without a byte-order mark. The filename comes from the title when available; otherwise, it uses synced-lyrics.lrc. Unsafe filename punctuation is replaced with hyphens.
- Open the file beside the exact recording and adjust individual timestamps when needed, then test the result in the player where it will be used.
See how fixed-interval timing works
Suppose the first timestamp is 00:12.34 and the selected interval is 2.50 seconds. The calculation proceeds as follows:
Line 1: 00:12.34Line 2: 00:12.34 + 00:02.50 = 00:14.84Line 3: 00:14.84 + 00:02.50 = 00:17.34
The Subforge LRC time implementation confirms the underlying interpretation: minutes contribute 60,000 milliseconds, seconds contribute 1,000 milliseconds, and two fractional digits represent centiseconds. The arithmetic stays consistent across many lines, but that consistency does not mean the result matches real vocal timing. A song can pause, repeat phrases, or change pace, so the fixed draft still needs a listening pass.
Match the draft to the exact recording
A fixed interval is only a starting point because real vocals rarely begin at perfectly equal spacing. Open the downloaded LRC in a dedicated editor, or use a player that permits timestamp editing, and compare it with the exact recording used for playback. Start with the first and last timestamps, then review each transition where a line appears too early, too late, or not at all.
Keep the basic [mm:ss.xx]timestamp structure when changing individual values. Check the file again after editing because a different editor may save different encoding or formatting. Players can differ in their handling of metadata, timestamp precision, encodings, long minute values, and enhanced-LRC extensions.
| Check | Possible difference | Recommended response |
|---|---|---|
| Opening and closing timing | The first or last lyric may enter or leave at the wrong moment | Verify the first and last timestamps against the recording |
| Long minute values | A player may not interpret every supported minute value identically | Test the completed file in the target player |
| Title, artist, and album tags | Metadata support varies between players | Confirm whether the player displays each tag you supplied |
| Enhanced or word-level lyrics | The simple output does not contain angle-bracket word timings or duet markers | Use a separate workflow if those specific features are required |
| Text encoding | The generator downloads UTF-8, while a later editor may save differently | Check for missing or garbled characters after editing |
Understand the workflow's boundaries
The generator does not listen to audio, detect speech, transcribe lyrics, align phonemes, identify beats, or estimate performance timing. It also does not supply copyrighted lyrics, search a catalog, identify a song, confirm ownership, or grant a synchronization license. It only formats text that you provide. You must have permission to reproduce and distribute any lyric text entered into the tool.
Content and arithmetic stay in the current browser tab. Lyric text is not uploaded, stored in an account, or sent to an AI service. If you need transcription, recording-based synchronization, word-level timing, karaoke duet markers, or another extended LRC feature, use a workflow designed for that specific task and then confirm that the target player supports the resulting format.
Run a final playback check
Before treating the file as finished, confirm that the lyric order matches the recording, the first and last timestamps are sensible, and each line changes at the intended moment. Also verify the metadata, open the saved file in the target player, and check that every character appears correctly. The generated arithmetic may be exact while the vocal alignment still needs manual correction, so test the completed file rather than assuming the first preview is playback-ready.
If you're weighing options, How Do I Get Started When I Need to Generate an LRC File covers this in detail.
If you're weighing options, Plan Steps to Generate LRC File Using Create LRC File covers this in detail.